How to maintain the milking equipment

With the progress of the times, milking equipment is used in large quantities. If the milking equipment is not used properly and the maintenance is not good, the service life of the milking equipment will be greatly shortened and the user will be lost. Here, Zibo Jin Wo Machinery Technology Co., Ltd. introduces some reasonable maintenance knowledge for milking equipment.
1, do not expose the milking equipment to the sun. The milking equipment under the sun is easy to make the rubber parts and plastic parts aging and deforming, and shorten the service life.
2, keep the milking equipment clean and avoid using in dusty environment. Because a lot of dust will increase the wear of milking equipment.
3, do not store milking equipment at low temperatures below zero centigrade. After the milking is finished, the pulsator should be removed and placed in a warm and dry place.
4. Under normal circumstances, milking equipment only needs to clean up the air filter screen, and it does not need to be cleaned regularly. The air pulsation device can not be washed in water, which may cause the vacuum pipeline to enter the water, thus affecting the normal operation of milking equipment.
In the end, if the milking equipment fails, we should not stick to the rules in the maintenance and carry out the theory. We must combine the actual situation at the time, broaden the train of thought, step by step, and exclude one by one until the real cause of the failure is found.